1.2.4
Setting Home Position/Sensor Position/Preset
Button
The home position, sensor position and 8 preset buttons can be registered. Preset
buttons (1—4) are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4:
Lower Right. These buttons can be changed (see page 20).
•
Registered buttons are shown in blue.
•
Unregistered buttons are shown in white.
When clicking each button, the image switches to the home/sensor/preset position.
When restarted, the camera takes a home position. If the Lens Position When
Triggered setting is set (see page 65), the camera takes a sensor position after the
pyroelectric infrared sensor detects temperature differences.
Registering Home Position/Sensor Position
1.
Click [Program].
•
[Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2.
Pan and tilt the camera to a desired
position.
3.
Click the home position button or the
sensor position button.
4.
Click [Save].
•
The bar switches to the operation
bar.
•
Clicking [Back] takes you back to the
previous page.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
Home
Position
Pan/Tilt
Program
Sensor
Position
17