NETGEAR Nighthawk X4S R7800 User Manual page 10

¾ To access the USB storage device from a Mac:
1. Connect your USB storage device to a USB port on the router.
It might take up to two minutes before the USB storage device is
ready for sharing.
2. On a Mac that is connected to the network, launch Finder and select
Go > Connect to Server.
The Connect to server window displays.
3. Enter the smb://readyshare in the Server Address field and click
the Connect button.
4. When prompted, select the Guest radio button.
5. If you set up access control on the router and you allowed your Mac
to access the network, select the Registered User radio button and
enter admin for the name and password for the password.
For more information about access control, see the user manual,
which is available online at
link in the router's user interface.
6. Click the Connect button.
A window displays the files and folders on the device.
downloadcenter.netgear.com
10
or through a