Panasonic DMC-GX80K Basic Operating Instructions Manual page 18

Preparation/Basic "Quick Start Guide"
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
C Focus indication
•
Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
•
Once the subject is in focus, the focus indication is
displayed. (When the subject is not in focus, the
indication flashes.)
3
Press the shutter button fully (push it in
further), and take the picture.
•
Be careful not to move the camera when you press the shutter button.
•
When the image is correctly focused, the picture will be taken, since the [Focus/
Release Priority] is set initially to [FOCUS].
∫ Adjust the angle of the monitor
•
Be careful not to catch your finger, etc. in the monitor.
•
When adjusting the angle of the monitor, be careful not to
apply too much force, as this may cause damage or
malfunction.
•
When not using this unit, close the monitor completely back to the
original position.
•
Return the monitor to its original position when attaching a tripod/
monopod.
•
Use of a tripod/monopod may limit the maximum angle to which
the monitor can be adjusted, depending on the type of the tripod/
monopod.
11 Check the picture you have taken
•
The [Auto Review] function displays the picture you have
just taken.
•
To display the picture in Playback Mode, press [(].
18
SQT1322 (ENG)
C
3.5 3.5 3.5 60 60 60
A B
1/98 1/98 1/98 1/98