Adjusting The Audio Level - Panasonic AJ-SDC915 Operating Instructions Manual

Adjusting the Audio Level

Manually Adjusting the Audio Level
Limiter
Adjusting the Audio CH1 Level from the Viewfinder
If the AUDIO SELECT CH1/CH2 selector switch is set to AUTO, the input levels of audio CH1 and
CH2 are automatically adjusted. If are the level of audio channels 1 and 2 to be manually adjusted,
perform the following operations.
1
Set the AUDIO SELECT CH1/CH2 selector switch to MAN.
2
Turn the AUDIO LEVEL CH1 control at the bottom of the front panel completely to the right.
3
Turn the AUDIO LEVEL CH1/CH2 controls to adjust the audio level so that the level meter
appears up to 0 dB at the maximum volume.
When the audio level is adjusted manually, the limiter circuit operates with respect to excessive
input. The limiter circuit is turned ON or OFF on the "MIC/AUDIO" SUB menu page of MAIN menu
screen 3 of 4. (The factory setting is "OFF".)
The audio CH1 level can be adjusted by the AUDIO LEVEL CH1 control at the bottom of the front
panel while watching the viewfinder.
1
Set the AUDIO SELECT CH1 switch to MAN.
2
Turn the AUDIO LEVEL CH1 control on the side panel completely to the right.
3
Set LEVEL METER to "CH1" on the "VF INDICATOR" SUB menu page of MAIN menu 2 of 4.
The audio level display now appears on the viewfinder screen.
2
4
– 81 –
3
1
2
1