Panasonic AJ-HDC27FE Operating Instructions Manual page 120

Setting menu screens
TC/UB screen
The time code and user's bit settings are performed on
this screen.
Variable
Item
range display
P. OFF LCD ON USER
DISPLAY OFF ENG
TC OUT TCG USER
TCG/TCR ENG
The underlining in the variable range column indicates the setting in the preset mode.
VTR MAIN MENU
VF
Remarks
For setting whether the
LCD display is to appear
when the power is OFF.
ON : The LCD display
appears even when
the power is OFF.
OFF : The LCD display
does not appear
when the power is
OFF.
The power-saving mode is
established.
For selecting the time
code which is to be output
to the time code output
connector.
TCG:
The time code generated
by the time code
generator is output at all
times.
TCG/TCR:
The time code generated
by the time code
generator is output in the
E-E mode; the time code
reader value is output in
the V-V mode.
Variable
Item
range
VITC UB MODE USER
DATE
TIME
EXT
TCG
TC DISP SEL 24F
25F
30F
120 (E)
VF
Remarks
display
USER For setting what is to be
ENG written as the user's bit in
the VITC area.
USER : User setting (fixed).
DATE : Real time value for
year/month/day/
hours.
TIME : Real time value for
hours/minutes/
seconds.
EXT : The UBG value is
slave-locked when
a TC signal is
supplied from an
external source.
(The user setting is
used when no
external input is
supplied.)
TCG : Time code
generator value
<Notes>
O Set the time on the
TIME/DATE menu
screen when using the
UB MODE item with
real-time operation.
OThe tape management
information is not
output as the user's bit
information in the
VITC area.
USER For setting the number of
ENG frames to be displayed per
second in the time code
frame digits.
24F: 0 to 23 frames will be
displayed per second.
25F: 0 to 24 frames will be
displayed per second.
30F: 0 to 29 frames will be
displayed per second.