Vtr Vf Indicator Screen; Mic/Audio Screen - Panasonic AJ-HDC27FE Operating Instructions Manual

Setting menu screens

VTR VF INDICATOR screen

The information to be displayed in the viewfinder is set
on this screen.
Variable
Item
range display
TAPE (IND) ON USER
OFF ENG
BATTERY (IND) ON USER
OFF ENG
LEVEL METER CH1 USER
(IND) CH1•CH2 ENG
OFF
AUDIO IN (IND) ON USER
OFF ENG
TC (IND) TCG USER
TCR ENG
TCG/TCR
OFF
VTR WARNING ALWAYS USER
(IND) NORMAL ENG
OFF
The underlining in the variable range column indicates the setting in the preset mode.
VTR MAIN MENU
VF
Remarks
For switching the
remaining tape display to
ON or OFF.
For switching the battery
voltage display to ON or
OFF.
For selecting what the
audio level meter is to
display.
CH1: The level of the CH1
signals only is displayed.
CH1•CH2: The levels of
both the CH1 and CH2
signals are displayed.
OFF: No display.
For switching the audio
input display to ON or OFF.
ON: The audio input is
displayed.
OFF: The audio input is not
displayed.
For selecting what the
time code is to display.
TCG: The time code
generated by the time
code generator is
displayed in the E-E
mode.
TCR: The time code reader
value is displayed in the
V-V mode.
TCG/TCR: The time code
generated by the time
code generator is
displayed in the E-E
mode; the time code
reader value is displayed
in the V-V mode.
OFF: The time code is not
displayed.
For setting when the
VTR's warnings are to be
displayed.
ALWAYS: The warning
display always appears
when a warning has
occurred.
NORMAL: The display
appears for 3 seconds
after the warning
occurred and for 3
seconds after recording
was started or
completed.
OFF: The warning displays
do not appear.
Variable
Item
range
SAVE LED SAVE&TAPE
SAVE

MIC/AUDIO screen

The MIC/AUDIO settings are performed on this
screen.
Variable
Item
range
FRONT MIC ON
POWER OFF
MIC LOWCUT FRONT
CH1 REAR
F&R
OFF
<Note>
The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
117 (E)
VF
Remarks
display
USER For setting the operation
ENG of the SAVE lamp.
SAVE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
SAVE&TAPE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
When the tape is
approaching its end, it
flashes in tandem with
the warning alarm that
sounds when tape-end is
approaching.
VF
Remarks
display
USER ON : The phantom power
ENG is supplied to the
front microphone.
OFF : The phantom power
is not supplied to the
front microphone.
USER For setting the high-pass
ENG filter for the CH1 mic input.
FRONT: The high-pass filter
for the front mic
input is set to ON.
REAR : The high-pass filter
for the rear mic
input is set to ON.
F&R : The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF : The high-pass filter
for the CH1 input
is set to OFF.