Tray - Sony XDJ-1000 Operation Manual

Tray

a LEDs
Displays the status of each slot in bins A and B. When a
slot is specified using the web application, the LED flashes
for easy identification of the corresponding slot.
The slots are numbered 1 to 15 from top to bottom.
On: Indicates that operations are in progress, using the
web application, for the Professional Disc in the
corresponding slot. If the LED is On and the slot is
empty, the disc from that slot is currently inserted in a
drive. A warning sounds if you try to remove a disc or
insert a disc into a slot when the corresponding LED
is On.
Off: Indicates that no operation is in progress for the
Professional Disc in the corresponding slot. In this
state, a Professional Disc can be inserted or removed.
Flashing: Indicates that the corresponding slot is flashing
in the web application.
b Bin A
c Bin B
Each bin can store up to 15 Professional Discs. Bins can be
removed and exchanged.
When removing a bin, raise the handle and lift the bin out.
When inserting a bin, lower the handle to the back of the
bin.
38
Name and Function of Parts
Notes
• Keep the slot openings face up when carrying a loaded
bin. Otherwise, the discs may fall out.
• Do not swing the bins when holding the bins by the
handle. The discs may fly out and cause an injury.
RFID tag attachment point
Label attachment point
Label attachment points
Used for attaching commercially available labels for bin
management.
RFID tag attachment point
Used for attaching the supplied RFID tags for bin
management.
Notes
• To use RFID tags on bins, the optional RFID tag reader/
writer for bins must be installed in the library.
• Do not exert undue pressure on the center of the RFID
tag. Doing so may damage the tag.
• RFID tags cannot be reused once peeled off. Always
attach new tags only.