Connecting The Aq-Ec1 Extension Control Unit (Option) - Panasonic AJ-D400 Operating Instructions Manual

Dvcpro digital camera/vtr
Hide thumbs Also See for AJ-D400:
Table of Contents

Advertisement

Connecting the AQ-EC1 Extension Control Unit (Option)

Connecting the AQ-EC1 extension control unit (option) allows a portion of the camera section
functions to be operated by remote control.
When the AQ-EC1 is connected and the POWER switches of the unit and AQ-EC1 are set to
ON, the unit automatically enters remote control mode.
The handling instructions included with the AQ-EC1 describe operations for when the AQ-EC1 is
connected to an AQ series digital camera.
When the AQ-EC1 is connected to the AJ-D400, some functions differ, and some features can-
not be used.
ECU Connector
Notes
The POWER switches of the unit and AQ-EC1 must be set to OFF before the 6-pin cable is
connected or disconnected.
All adjustments and settings made using the switches and controls other than the menu setting
section of the AQ-EC1 are erased when the unit's POWER switch is set to OFF. Also, adjust-
ments and settings made using the AQ-EC1 cannot be written to setup cards. However, when
the AQ-EC1 is connected again, these settings return to the AQ-EC1 settings.
(Menu contents set with the menu setting section are saved.)
Note
The functions of the AQ-EC1 are limited as follows.
The STORE switch does not function.
(If the menu settings are changed while the AQ-EC1 is connected to the AJ-D400, the new
menu settings are saved automatically as soon as the changes are made.)
Note that the AQ-EC1 gain switch displays
OUTPUT switch settings CAMERA, TEST and BAR to CAM/AUTO KNEE ON, CAM/AUTO
KNEE OFF and BAR for each main unit.
The Synchro scan and Super V modes cannot be used while the AQ-EC1 is connected to the
unit.
The lens iris (IRIS) control of the AQ-EC1 is valid only when the lens iris AUTO/MANUAL se-
lector is set to AUTO.
3, 0 and 9 correspond to L, M and H, and the
– 44 –
6-pin Cable
ECU AQ
-
O UT P UT
GAIN
SHUTTER
ECU
ON
1/500
1/250
CAMERA
9
1/1000
1/125
ON
TEST
0
1/2000
1/100
OFF
BAR
-3
(dB)
OFF
WHITE
PAINTING
BALANCE
A
B
PRE
R
GAIN
B
AUTO W/B
BALANCE
AWB
ABB
R
BLACK
B
IRIS
MANUAL
AUTO
MASTER
PEDESTAL
ON
PAGE
UP
ITEM
DWN
ON
SELECT
CONTROL
STORE
OFF
SET UP
AQ-EC1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aj-d400p

Table of Contents