When Using A Battery Pack Made By Anton Bauer - Panasonic AJ-D215P Operating Instructions Manual

When using a battery pack made by Anton/Bauer
Before using the battery pack, charge it using the special battery charger made by Anton/Bauer. For the
charging time and other details, refer to the operating instructions of the battery charger used.
1
Attach the battery pack made by Anton/Bauer.
2
Set menu item 7. BATTERY (BATT.SELECT) to the battery which is to
be used.
Remarks:
Insert it in the direction indicated by the arrow and slide it into place.
Power output connector for light
Battery pack made by Anton/Bauer
Light control switch
$ Provided on the battery holder made by Anton/Bauer are a power
output connector for a light and a light control switch. A light can be
easily attached.
Anton/Bauer representative.
For further details, refer to the menu items (pages 48 to 50).
$ To remove the battery pack
While holding the unlocking lever on the battery holder all the way
down, slide the battery pack in the direction indicated by the arrow.
Unlocking lever
– 21 –
For details on lighting systems, consult an