Pos. Change - Panasonic TX-68PS12A Operating Instructions Manual

Preset Operation

POS. CHANGE

This option allows you to save the broadcast channel you are currently watching into any Programme Location
Number. The television should be switched ON and the TV/AV Switch set to TV.
POS. CHANGE Using the Front Panel Controls
1. Open the front panel door.
2. Push the PRE. Button six times.
3. Select the new Programme Location Number. (Use the front panel Programme Number Up or Down
Buttons)
4. Press the TV/AV button to store the channel.
5. When you are satisfied with your selection you can
- Store more Programme Location Numbers by repeating steps 3 and 4.
- Return the television to normal operation by pushing the PRE. Button twice.
POS. CHANGE Using the Remote Control
MAIN MENU
30
1 PRESET
AUTO TUNE
MANUAL TUNE
COLOUR SYS
FINE TUNE
SKIP
POS. CHANGE
GEOMAGNETIC
1. Push the MAIN MENU Button.
2. Select the PRESET Menu using the Left (
Button. When the Preset symbol is highlighted, the Preset Menu
has been selected.
3. Push the Down (
option.
4. Select the new Programme Location Number. (Use the Remote
Control Programme Number Up / Down Buttons, Direct Access
Buttons or Two Digit Select Button).
PRESET
5. Push the TV/AV Button to switch to store the channel.
6. When you are satisfied with your selection you can
- Store more Programme Location Numbers by repeating
steps 4 and 5.
- Return the television to normal operation by pushing the
MAIN MENU Button twice.
AUTO
OFF
1
0
) Button to access the POS. CHANGE
) or Right ( )