Tuning Menu; Programme Edit - Panasonic TX-32PB50F, TX-28PB50F Operating Instructions Manual

Panasonic colour television operating instructions tx-32pb50f, tx-28pb50f
Hide thumbs Also See for TX-32PB50F, TX-28PB50F:
Table of Contents

Advertisement

Tuning menu --- overview
Press the SETUP menu button
Move to Tuning menu option
Access Tuning menu
Move to chosen menu option
Adjust chosen option or access chosen menu
Press the TV/AV button at any time to go back to
watching TV
Pressing the STR button after having adjusted some
features will store the setting as the default (replacing
the factory setting).
Programme
Access in order to customise your programme
edit
settings (eg: adding or deleting a programme
position) See page 12.
Auto setup
Allows you to automatically retune the TV. Useful
if you move house and wish to retune your TV to
the local stations. See page 14.
Manual tuning
Allows individual programme positions to be
tuned manually. See page 15.
Fine tuning
Use to make small adjustments to the tuning of an
individual station (useful for example when
weather conditions are affecting reception quality
of a programme).
Colour system
Lets you select the correct transmission standard
for the transmission signal being received.
Volume correc.
Lets you adjust the volume level of individual
stations. Use this feature if the volume level varies
significantly between stations. Adjusting one
station's volume to bring it into line with the other
stations means you can avoid having to adjust the
volume each time you change channels.
Decoder (AV2)
This option is used when a decoder is connected
via AV2. Store the setting as On so that every time
this programme position is selected, the TV
software is set to handle the decoded information
(this is important if your decoder unit is connected
to AV2 via a Q---Link VCR).
RF Att
When a strong signal (such as a cable signal) is
received, sometimes two channels transmitted
close together interfere with each other's picture
(this is the 'beat' you see on the picture). Set this
option to On to 'damp down' the strength of the
signal for the current programme position, so
eliminating the 'beat'. Store the setting as On so
the signal is 'damped' every time this programme
position is selected.
SET UP
TV/AV
STR
11

Advertisement

Table of Contents
loading

Table of Contents