Juniper MESA User Manual page 26

5 – I don't know what type of barcode I am trying
to scan.
Reason/Solution: Enable all the barcode types
on the 1D Code Types, Composite/Postal Code
Types, and 2D Code Types tabs (some types are
mutually exclusive). Go to the Test tab. Scan the
barcode and the Code Type window shows the
type of barcode scanned. When you are finished,
go back and deselect barcode types you are not
using.
6 – My TLC-39 Composite barcode will not scan.
Reason/Solution: On the 1D Code Types tab
ensure that Code 39 is checked. Also select
Options, then the Code 39 tab and ensure that
Convert Code 39 to Code 32 is unchecked.
7 – My UPC barcode will not scan.
Reason/Solution: On the 1D Code Types tab
ensure that barcode types UPC-A, UPC-E and
UPC-E1 are checked. If composites codes are
also enabled on the Composite/Postal Code
Types tab and you still want to allow a UPC 1D to
scan, select Autodiscriminate from the drop down
list. Also go to the 1D Code Types tab, select
Options, then the tabs for UPC/EAN-1 and UPC/
EAN-2. Make sure the settings are correct for your
application.
26
Mesa Barcode Scanner Owner's Manual