Cutting Your Hair - Panasonic ER-CA70 Operating Instructions Manual

►
3/6mm, 9/12mm, 15/18mm comb attachments
6mm
9mm
3mm
3/6mm
12mm
9/12mm
18mm
15/18mm
15mm
1. Select the 2. Mount the
cutting heights attachment to
indicated on the the clipper as
insides and illustrated.
sides of the
attachments.
►
Natural cutting attachment and Point cutting
attachment
These attachments allow thinning of hair by
cutting from the inner side. Hair volume is
reduced, and hair tips are trimmed at various
lengths to leave a natural look.
Natural cutting attachment:
Desirable hair lengths are 30 mm‑70 mm
(hair lengths shorter than 30 mm may be too
short to cut in some situations.)
Point cutting attachment:
Desirable hair lengths are less than 30 mm
(for cutting sideburns and around the ears.)
4
►
Thinning Attachment
3. Remove the 1. Insert the attachment
attachment over the trimming blades
from the clipper. until it clicks as
illustrated.
1
Cut hair to the correct height by
POI NT
CUTT ING
NAT URA L
CUTT ING
moving the clipper back against the
flow of the hair.
• Do not use the clipper in an inverted
2. To remove the
Cutting your hair
position. This can cut hair too deeply.
attachment, push both
sides while pulling the
attachment.