Parts Identification - Panasonic ER-CA70 Operating Instructions Manual

Parts identification
A Blade
B Attachment mounting
C Switch
D Charging indicator lamp
E 3/6mm comb attachment
F 9/1mm comb attachment
G 15/18mm comb attachment
H Natural cutting attachment
I Point cutting attachment
J Thinning (1/3) attachment
K 0/30/40mm comb attachment
L 50/60/70mm comb attachment
M Lever for cleaning
N AC adaptor (RE9‑36)
O Power cord
P Oil
Q Cleaning brush
Attachments
3/6mm comb attachment
9/1mm comb attachment
15/18mm comb attachment
Natural cutting attachment
Point cutting attachment
Thinning (1/3) attachment
0/30/40mm comb attachment
50/60/70mm comb attachment









 






ER‑CA70 ER‑CA35
‑
‑
‑
‑
‑
Charging
1. Set the switch 2. Connect the AC
to "0•CHARGE", adaptor into an
and insert the outlet. The
power cord into charging
the clipper. indicator lamp
will light up.
• The charging time is 8 hours.
• 1 full charge will provide approximately 40 minutes of continuous
operation.
Inserting the attachment
►
20/30/40mm, 50/60/70mm comb attachments
1. Adjust the attachment to the desired
trimming height by sliding it until it
clicks while the switch is in
"0•CHARGE".
• Set the attachment to the correct position.
Otherwise you cannot set the switch to "1".
• Actual hair length will be a little longer than
the height you set.
3. Disconnect the
AC adaptor
from an outlet
when charging
is completed.
3