Color Matrix; Vm (Velocity Modulation) - Panasonic CT 30WX52 Operating Instructions Manual

PICTURE Adjustment

COLOR MATRIX

Displays input signals (480p signals) in a natural color from digital equipment adaptors connected to COMPONENT VIDEO
INPUT (Y, P /C ,P /C input terminals).
b b r r
Select HD or SD to automatically adjust color parameters for HD (high definition) and SD (standard definition).
1
CH
VOL VOL
CH
2
CH
VOL VOL
CH
Note:
(1) When viewing a non-standard DTV signal format, you can change color parameters manually for the best picture
quality.
(2) COLOR MATRIX does not need to be set when using High-Definition equipment or 480i output equipment. Use only for
480p signal source.

VM (Velocity Modulation)

Select ON to emphasize the edge of an image, or select OFF.
1
CH
VOL VOL
CH
2
CH
VOL VOL
CH
32
In PICTURE menu press to select OTHER ADJ2.
Press to enter submenu field.
In OTHER ADJ2 submenu field press to select
COLOR MATRIX.
Press to select SD or HD.
SD : When the input signal is a normal TV
system (NTSC).
HD : When the input signal is a High-Definition
system (HD).
In PICTURE menu press to select OTHER ADJ2.
Press to enter submenu field.
In OTHER ADJ2 submenu field press to select VM.
Press to select ON or OFF.
ON OFF
VIDEO ADJ.
OTHER ADJ1
COLOR MATRIX
OTHER ADJ2
VM
FREEZE
VIDEO ADJ.
OTHER ADJ1
COLOR MATRIX
OTHER ADJ2
VM
FREEZE
SD
ON
SPLIT
SD
ON
SPLIT