Recording Television Programmes - Panasonic DMR-E95H Operating Instructions Manual

Recording television programmes

SD CARD PC CARD EJECT
HDD
¥ DIRECT
DIRECT TV REC
TV REC
Numbered
buttons
CANCEL
∫
DIRECT NAVIGATOR
DIRECT
NAVIGATOR
TOP MENU
3,4,2,1
ENTER
SUB MENU
PROG/CHECK
STATUS
F TIMER
EXT LINK
4
[HDD] [RAM] [DVD-R]
≥It is not possible to record to both HDD (Hard disk drive) and DVD
drive simultaneously.
≥You can record up to 500 titles on HDD, 99 titles on one disc.
≥It is not possible to record continuously from one side of a double sided
disc to the other. You will need to eject the disc and turn it over.
≥When using 8 cm DVD-RAM, remove the disc from the cartridge.
≥It is not possible to record CPRM (➡ page 55) protected material
onto DVD-R or 2.8 GB DVD-RAM discs.
≥It is not possible to record to a card.
When transferring (dubbing) in high speed mode to DVD-R
after you have recorded to the HDD.
When transferring (dubbing) a title using the high speed mode to
a DVD-R, set "DVD-R Rec for High Speed mode" to "On" before
recording to the HDD (➡ page 48).
However, the following restrictions apply.
≥When recording bilingual broadcasts, only the audio selected in
"Bilingual Audio Selection" (➡ page 49) is recorded ("M 1" or
"M 2").
≥Even 16:9 aspect (Widescreen) programmes are recorded in
4:3 aspect.
≥Even if "Hybrid VBR Resolution" is set to "Automatic", it
changes to "Fixed" automatically, and the "Automatic" setting
does not work (➡page 48).
When recording to DVD-R
≥When recording bilingual broadcasts, only the audio selected in
"Bilingual Audio Selection" (➡ page 49) is recorded ("M 1" or
"M 2").
≥In order to play a DVD-R recorded using this unit on
another playback source, the disc must first be finalized
(➡ page 45).
RQT7467
18
2 Time Slip indicator 1 5
OPEN/CLOSE
TIME SLIP HDD DVD SD PC DRIVE SELECT
TIME SLIP CH
DVD
HDD, DVD indicator
3
TIME SLIP
DVD
TV
VOLUME
CH
AV
1
HDD DVD SD/PC
1 2 3
3
CH
4 5 6
VIDEO Plus+
7 8 9
INPUT SELECT
MANUAL SKIP
INPUT SELECT
0
SKIP SLOW/SEARCH
;
STOP PAUSE PLAY/x1.3
1
FUNCTIONS
FUNCTIONS
ENTER
RETURN
RETURN
DISPLAY
STATUS TIME SLIP
TIME SLIP
TIMER ERASE REC MODE REC 5
F
CREATE
DUBBING AUDIO
CHAPTER
AUDIO
A B C
1
Press [HDD] or [DVD] to select the
recording drive.
The HDD or DVD indicator lights up on the unit.
REC
2
x / 1.3
If you selected the DVD drive
Press [< OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
∫ 1
≥Press the button again to close the tray.
Insert label-up.
3
Press [W X CH] to select the channel.
HDD SD PC
EXT Link
PLAY
REC
To select with the numbered buttons:
e.g., 5:
15:
4
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
HDD SD PC
EXT Link
PLAY
REC
≥To record sound using LPCM (XP mode only):
Set the "Audio Mode for XP Recording" to "LPCM" in the
SETUP menu (➡ page 49).
5
Press [¥ REC] to start recording.
HDD
EXT EXT Link Link
PLAY PLAY
REC
Recording will take place on open space on the HDD or on
disc. Data will not be overwritten.
≥You cannot change the channel or recording mode during
recording.
≥[HDD] [RAM] You can change the audio being received by
pressing [AUDIO] during recording. (Does not affect the
recording of audio.)
∫ To stop recording
Press [∫].
From the start to the end of the recording is called one title.
[HDD]
When continuously recording for long durations, titles are
automatically divided every 8 hours.
[DVD-R]
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
∫ To pause recording
Press [;].
Press again to restart recording.
(Title is not split into separate titles.)
Insert fully so it clicks into place.
Insert with the arrow facing in.
XP XP XP
SP
LP LP LP
EP EP EP
[0] ➡ [5]
[1] ➡ [5]
XP
SP
LP
EP
Remaining time on the disc
XP
SP SP SP
LP LP
EP EP
PLA