Panasonic DMR-BCT74 Operating Instructions Manual page 94

Convenient functions
Basic Settings
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When "REWIND LIVE TV" is set to "On"
( 86), "Off" cannot be selected.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing "Automatic Stop" or
"Recording Time" (
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (
media other than HDD with DIRECT
NAVIGATOR, Copying titles with copying
list).
RF OUT ( CATV Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When "Quick Start" is not activated).
• If "On" is selected, the broadcasting signal
is output from this unit.
Power Save for Network Standby
You can minimise power consumption in
standby mode even when the "Quick Start"
function is activated. (
• When this is set to "On", startup time when operating
[GUIDE] and [DIRECT NAVIGATOR] from standby
mode will be longer.
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
• Use "Set Code 1", the factory set code, under
normal circumstances.
94
SQT0351
30).
56, Copying from
110)
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
Clock
If the time is not set correctly, use the settings
listed in the method below.
• Automatic
This unit usually obtains time and date
information from digital broadcasts.
• Time Zone
When the time is not correct, set "Time Zone".
(GMT - 6 to + 6)
• Manual Setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
• When the clock is set manually, you cannot perform
playing/recording/PAUSE LIVE TV/REWIND LIVE TV of
the programmes that are copy protected (Retention
limit). ( 15)
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
buttons.
2 Enter the new 4-digit PIN with the number
buttons.
• Make a note of PIN in case you forget it.
e.g.,
PIN Entry
Remember the PIN.
0 0 0
OK
3 Press [OK].
0