Bosch WFO 2860 Instruction Manual And Installation Instructions page 54

Table of Contents

Advertisement

Transport,
e.g. when moving
Preparing and inserting the
transport bolts
54
Before transporting the washing machine:
- Turn off the water tap.
- Release the water pressure in the supply hose
(refer to Page 34).
- Drain any residual washing solution (refer to
Page 32).
- Disconnect the washing machine from the mains.
- Detach the hoses.
- Install the lower 2 transport bolts.
Having transported the appliance and ensured
proper installation and connection, allow the Drain"
programme to run through before starting the first
wash programme.
q Remove the 2 lower covers.
q Prepare the transport bolts:
Loosen the screw in the sleeve until the end of the
screw is level with the end of the sleeve.
q Insert and tighten transport bolts 1 and 2. The lug
on the washer must be located in the groove in the
rear panel of the housing.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents