Advanced Setup; Changing The Advanced Setup Menu Parameters - Yamaha R-S300 Owner's Manual

■ ADVANCED SETUP menu parameters
Change the initial settings to reflect the needs of your
listening environment.
y
The default settings are marked with "*".
APD (Automatic Power Down) TIMER
Choices: 4H (4 hours), 8H* (8 hours), 12H (12 hours)
When the POWER MANAGEMENT switch on the rear
panel of this unit (see page 7) is set to ON, this unit
automatically enters standby mode if it is not operated for
the specified amount of time.
Note
When the POWER MANAGEMENT switch is set to OFF, "APD
TIMER -OFF" is displayed.
INITIALIZE
Choices: NO*, YES
Resets all parameters to their factory presets.
• Select NO to cancel without resetting all parameters to
their factory presets.
• Select YES to reset all parameters to their factory
presets.
Note
If "YES" is selected the parameters are reset the next time you
turn on the power of this unit.

ADVANCED SETUP

Changing the ADVANCED SETUP
menu parameters
The ADVANCED SETUP menu is displayed in the front
panel display.
y
• Audio output is muted while setting parameters in the
ADVANCED SETUP menu.
• While setting parameters in the ADVANCED SETUP menu,
most controls on the front panel are disabled; only A (power),
the INPUT selector and FM MODE/INFO are operational.
A (power)
1
Press and hold FM MODE/INFO on the front
panel, and then press A (power) inward.
This unit turns on, and the ADVANCED SETUP
menu is displayed on the front panel display.
2
Rotate the INPUT selector on the front panel
to select the parameter you want to change.
See "ADVANCED SETUP menu parameters" on
page 31 for a complete list of available parameters.
3
Press FM MODE/INFO on the front panel
repeatedly to change the selected parameter
setting.
To change other settings, repeat steps 2 and 3.
4
Press A (power) on the front panel outward
to turn off this unit to confirm your setting.
Note
The settings you made take effect the next time you turn on this
unit.
ADVANCED SETUP
FM MODE/INFO INPUT selector
31
En