Video - Yamaha RX-V871 Owner's Manual

Video

Configures the video output settings.
■
Analog to Analog Conversion
Enables/disables the video conversion (p.125) between the analog video jacks
(COMPONENT VIDEO and VIDEO).
Settings
Off Disables the video conversion between the analog video jacks.
Enables the video conversion between the analog video jacks.
On (default)
Converted video signals are output from the MONITOR OUT jacks only.
• This unit does not convert 480-line and 576-line video signals interchangeably.
• 480p/576p-, 1080i- and 720p-resolution video signals cannot be output from the VIDEO jacks (p.125).
■
Processing
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
Off (default) Disables the video signal processing.
Enables the video signal processing.
On
Select a resolution and an aspect ratio in "Resolution" and "Aspect".
• 720p-, 1080i- and 1080p-resolution video signals cannot be converted (p.125).
❑ Resolution
Selects a resolution to output HDMI video signals when "Processing" is set to "On".
Settings
Through Does not convert the resolution.
Selects a resolution automatically in accordance with TV
Auto (default)
resolution.
480p/576p, 720p, 1080i, Output video signals with a selected resolution.
1080p (Only the resolutions supported by your TV are selectable.)
• If you need to select a resolution that is not supported by your TV, set "MON.CHK" (p.107) in the
"ADVANCED SETUP" menu to "SKIP" and try again. (Note that output videos may not be displayed on your
TV normally.)
❑ Aspect
Selects an aspect ratio to output HDMI video signals when "Processing" is set to "On".
Settings
Through (default) Does not convert the aspect ratio.
Outputs 4:3 video signals to a 16:9 TV with black bands on either
16:9 Normal
side of the screen.
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i or 1080p
signals.
98
En