Yamaha RX-V1077 Owner's Manual page 86

■
Operating the unit from Zone2 (remote connection)
You can operate the unit or external devices from Zone2 using the remote control
supplied with each device if you connect an infrared signal receiver/emitter to the unit's
REMOTE IN/OUT jacks.
• (China model only)
You can operate external devices with the supplied remote control if you register a remote control code for
each device. For details, refer to "Supplement for Remote Control" on the supplied CD-ROM.
REMOTE IN/OUT jacks
The unit (rear)
REMOTE
IN OUT
Infrared signal
transmitter
External device
(such as a CD player)
Main zone
Infrared signal
receiver
Remote control
(supplied with each device)
Zone2
Remote connections between Yamaha products
An infrared signal transmitter is not required if you are using Yamaha products that
support remote connections, as the unit does. You can transmit remote control signals
by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an
infrared signal receiver.
REMOTE IN/OUT jacks
REMOTE
IN
OUT
Infrared signal
receiver
Yamaha products
(up to six, including the unit)
Remote control
Zone2
PLAYBACK ➤ Playing back music in multiple rooms (multi-zone)
REMOTE IN/OUT jacks
REMOTE
IN
OUT
86
En