Audio Return Channel (Arc); Hdmi Signal Compatibility - Yamaha HTR-2067 Owner's Manual

Audio Return Channel (ARC)

ARC allows you to input TV audio to the unit with the HDMI cable which transmits video
signal to the TV.
Check the following after the HDMI Control settings.
1
Select a TV program with the TV remote control.
2
Check that the input source of the unit will be automatically switched
to "AUDIO 4" and the TV audio will be played back on the unit.
If you cannot hear the TV audio, check the following:
– "ARC" (p.43) in the "Setup" menu is set to "On".
– The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack
marked "ARC") on the TV.
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV.
• If the audio is interrupted while using ARC, set "ARC" (p.43) in the "Setup" menu to "Off" and use a digital
optical cable to input TV audio to the unit (p.17).
• When using ARC, connect a TV with an HDMI cable that supports ARC.
• "AUDIO 4" is set as TV audio input at the factory. If you have connected any external device to the AUDIO 4
jacks, use "TV Audio Input" (p.43) in the "Setup" menu to change the TV audio input assignment. To use the
SCENE function (p.25), you also need to change the input assignment for SCENE (TV).

HDMI signal compatibility

Audio signals
Audio signal type Audio signal format
2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit
Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit
DSD 2 to 5.1ch, 2.8224 MHz, 1 bit
Bitstream Dolby Digital, DTS
Bitstream
Dolby Digital Plus
(High definition audio)
Video signals
The unit is compatible with the video signals of the following resolutions:
• 480i/60 Hz • 720p/60 Hz, 50 Hz
• 576i/50 Hz • 1080i/60 Hz, 50 Hz
• 480p/60 Hz • 1080p/60 Hz, 50 Hz, 24 Hz
• 576p/50 Hz • 4K/30 Hz, 25 Hz, 24 Hz
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
Compatible media (example)
CD, DVD-Video, DVD-Audio
DVD-Audio, BD (Blu-ray disc),
HD DVD
SACD
DVD-Video
BD (Blu-ray disc), HD DVD
APPENDIX ➤ Information on HDMI
61
En