Yamaha AV-S77 Owner's Manual page 17

Connecting a CD Player or MD Recorder
Front speaker unit
AUDIO IN L
Optical fiber cable
(EIA standard)
(commercially available)
Connect the optical output terminal on the CD player or MD recorder to the DIGITAL 1 or 2 terminal on the front speaker
unit using a commercially available optical fiber cable.
If there is no optical output terminal, connect the analog audio output terminals on the CD player or MD recorder to the AUX
input terminals on the front speaker unit using a commercially available audio connection cord (2-pin).
DIGITAL
INPUT
OPTICAL 1 OPTICAL 2
(DTS/V/PCM) (DTS/V/PCM)
AUX TV VIDEO THROUGH
OUT
L R
AUDIO IN R
Audio connection cord (commercially available)
OPTICAL DIGITAL
OUTPUT
CD player, MD recorder, etc.
Anti-dust cap
Remove the cap covering the DIGITAL 1or 2
terminal when connecting an optical fiber
cable. Safely store the cap and always re-insert
it in the terminal when the terminal is not in
use. (This cap prevents the entrance of dust.)
Anti-dust cap
MARK
(WHITE)
AUDIO OUT R
CONNECTIONS
SYSTEM
CONNECTOR
MARK
(BLACK)
SPEAKERS
R L
AUDIO OUT L
Use the analog audio
output terminals if there
is no optical digital
output terminal.
R L
OUTPUT
15
E-