Table of Contents
Advertisement
Random Mode Performance
If you press an LED button long enough to enter an active note in the Random Mode, the active note will play back repeatedly. If you then enter a few
more active notes, the lights will "travel" from note to note, in the order entered, and the active notes will sound when the traveling light passes over
them. The Random Mode thus produces a totally different type of loop from the Score Mode.
Higher
1
Pitch
3
Lower
Active notes can be individually deactivated by pressing and holding
the corresponding LED button.
2
You can even spin loop-shapes you create in the Random Mode by
holding the [L4] button and running a finger around the matrix in the
direction and at the speed of the desired spin. The pitches of the notes
will change accordingly as the shape spins, producing loop sound
effects. To stop rotation, press and hold the LED button or press the
same LED button twice while holding the [L4] button.
Random Mode (Layer 08—11)
1
3
Hold the [L4] button.
2
13
Advertisement
Table of Contents
