Video And Audio - Yamaha RX-V367 Owner's Manual

■
Combining HDMI/AV1-2 input source

video and audio

Audio In
Input source: HDMI1-4, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
– an external device is connected with an HDMI cable but cannot
transmit audio through HDMI
– an external device with component video output and analog audio
output (such as certain game consoles) are connected to the
system
Inputs that change the audio source
HDMI1
Audio;;;;;;AV1
Assignable audio input jacks
To change assignments, select an input source (HDMI1-4 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
Audio inputs Settings method
Optical digital audio Select AV1 or AV4. Connect the external component
input audio cable to the optical jack for the selected input.
Coaxial digital audio Select AV2 or AV3. Connect the external component
input audio cable to the coaxial jack for the selected input.
Analog audio input Select one of AV5, AUDIO1, or AUDIO2. Connect
the external component audio cable to the audio jack
for the selected input.
• For details of settings, refer to "Receiving audio from other input
sources" (☞p. 15) and "Component connections to analog audio
output devices" (☞p. 16).
• To return audio inputs to their previous settings, display this item
again, and select the original input jack.
■
Displaying information on audio/video
signals
Signal Info
Input source: HDMI1-4, AV1-4
Displays information on digital audio and video signals on the
front panel display. You can display the signal information by
jENTER
pressing on the menu item and using
Menu item
FORMAT
VOL.
SW
C
L R
Audio information
SL SR
FORMAT
Format of audio signals.
CHAN
The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, "3/2/0.1" is
displayed.
SAMPL
The sampling frequency of analog-to-digital
conversion.
B RATE
The bit rate of input signal per second.
Video information
V IN
Format and resolution of video input signal.
V OUT
Format and resolution of video output signal.
V.MSG
Error messages about HDMI signals and components.
(appears only
Error message
when an error
HDCP Error
has occurred)
Device Over
Configuring the settings specific for each input source (Option menu)
• "No Signal" is displayed when no signals are being received, and
• The bit rate may vary during playback.
■
jCursor B / C.
FM Mode
Input source:
Sets this unit to automatically match FM broadcast frequencies in
VOL.
stereo, or to convert the frequency to monaural
SW
Dolby D
C
L R
■
SL SR
Information
Auto Preset
Input source:
Automatically detects radio stations in the FM frequency and
registers them as preset stations
■
Clear Preset
Input source:
Clears the preset stations
HDCP authentication failed.
The number of connected HDMI
components is over the limit.
SETUP
"---" is displayed if this unit cannot recognize the incoming
signal.
Changing FM mode (Stereo/Monaural)
TUNER
Automatically presetting FM radio
stations
TUNER
(☞p. 31).
Clearing preset FM stations
TUNER
(☞p. 33).
(☞p. 31).
35
En