Advanced Speaker Configuration; Speaker Layout Utilizing An External Power Amplifier - Yamaha RX-V2067 Owner's Manual

Advanced speaker configuration

Speaker layout utilizing an external power
amplifier
More speakers can be used by connecting an external amplifier to this
unit's PRE OUT jacks. The speaker layout specified using the Power
Amp Assign function varies when an external amplifier is connected.
Symbols on the table
Front L speaker Front presence L speaker
L PL
Center speaker Front presence R speaker
C PR
Front R speaker
R
Speakers that output sound
Surround L speaker
SL
Speakers that output sound
depending upon settings
Surround R speaker
SR
External amplifier
EA
Surround back L speaker
SBL
Surround back R speaker
SBR
■
Connections of speakers
Connect the speakers to the following jacks according to the speaker
layout. Refer to "Front/Center/Surround/Surround back speaker and
Subwoofer connection" and "Presence speaker connection" for details
on connecting speakers (☞p. 20). Refer "Connecting an external
amplifier" for details on connecting an external amplifier
■
Assigning a speaker configuration
A speaker configuration must be assigned to this unit to activate
speakers and an external amplifier. Use the "Power Amp Assign"
function to easily apply the appropriate speaker settings to this unit
in accordance with speaker configuration.
J
1 : You can also use two subwoofers by connecting them to both SUBWOOFER1
(FRONT) and SUBWOOFER2 (REAR) jacks.
■
Using a hi-fi amplifier to improve front
speaker sound quality
■ 9.1-channel speaker layout
(7 speakers + subwoofer + external front speakers)
PL
L
SL
The front speaker channel can be enhanced by using an external
amplifier possible of greater output power than this unit.
■ Connections of speakers
CENTER jack
SURROUND jacks
SURROUND BACK jacks
FRONT (PRE OUT) jacks
(☞p. 25).
SUBWOOFER (PRE OUT) jack
EXTRA SP1 jacks
■ Assigning a speaker configuration
Power Amp Assign 7ch + FRONT
EA PR
C
R
SW
SR
SBL SBR
Center speaker
Surround L/R speakers
Surround back L/R speakers
External amplifier
(for front L/R speakers)
J1
Subwoofer
Presence L/R speakers
CONNECTIONS
■
Using an external amplifier to output the
presence speaker channel
■ 7.1 + Presence speaker layout
(7 speakers + subwoofer + external front presence
speakers)
PL EA
C
L R
SL SR
SBL SBR
The front presence and surround back speaker channels can be
output at the same time.
■ Connections of speakers
FRONT jacks Front L/R speakers
CENTER jack Center speaker
SURROUND jacks Surround L/R speakers
SURROUND BACK jacks Surround back L/R speakers
F.PRESENCE (PRE OUT) jacks External amplifier
(for presence L/R speakers)
J1
SUBWOOFER (PRE OUT) jack Subwoofer
■ Assigning a speaker configuration
Power Amp Assign 7ch + FPR
PR
SW
23
En