Musiccast Controller - Yamaha WXC-50 Owner's Manual

■ Connecting audio devices (WXC-50)
Notice
Set the power to Standby when flipping this switch.
Volume control by the unit and

MusicCast CONTROLLER

Mini-systems /
Hi-Fi components
Connecting a Yamaha Hi-Fi amplifier (A-S series)
In the following connection setup, when the power of the unit is switched to On or
Standby, the power of the A-S series amplifier also switches automatically.
(Example) A-S1100
Monaural mini-plug cable
Note
Commercially-available cables are required for this connection setup.
Volume control by audio
devices
Note
In case of setting the switch to "PLAYER", the
unit outputs audio at maximum volume.
For more information about this
function, refer to the Owner's
Manual of the A-S series
amplifier.
Stereo pin cable (RCA cable)
EN
10
En