Connecting The Power Cable; Setting The Power To On/Standby; Connecting To A Network; Connecting To A Network Wirelessly - Yamaha WXA-50 Owner's Manual

Connecting the power cable

After all the connections are complete, plug the supplied power cable into the AC IN
jack on the rear panel, and then plug the power cable to an AC wall outlet.
To an AC wall outlet

Setting the power to on/standby

Use the z (power) key on the front panel or on the remote control to switch the unit's
power between on and standby.

Connecting to a network

Select whether to use a wired or wireless network connection, depending on your
network environment.
Connecting with a wireless router (access point)
Select a connection method listed below according to your network environment.
• Connecting with the MusicCast CONTROLLER
– Follow the instructions in the MusicCast CONTROLLER screen (p.16)
• Connecting using the Wi-Fi setting of an iOS device (iPhone/iPad/iPod Touch)
– Share the Wi-Fi settings of the iOS device (p.14)
• Connecting using the WPS push button on the wireless router (access point)
– Set up using the WPS push button (p.14)
• Connecting with a wireless router (access point) without a WPS push button
– Set up the wireless connection manually (p.36)
Connecting with a wired router
• Connect using the automatic setup function of the router
– Connect to a network by simply connecting to it with a cable (p.15)
Note
When playing back high resolution contents (p.42) via the network, we recommend using the wired network
connection for stable playback.

Connecting to a network wirelessly

Connect the unit to a wireless router (access point) using a wireless connection (Wi-
Fi). You can also connect the unit to a wireless network with the MusicCast
CONTROLLER (p.16).
Internet
Wireless router
Modem
The unit
Mobile device (such
as iPhone)
Note
For a wireless connection, turn on the wireless switch on the rear panel.
13
En