4
One-Touch Dialler
4-A Storing a Phone Number in the DIRECT Button
You can store a phone number in the (DIRECT) button. The stored number
is dialled with a one-touch operation.
The TALK indicator light must be off before programming.
(DIRECT)
TALK Indicator
(TALK)
PROGRAM
AUTO
4-B Dialling a Stored Number in the DIRECT Button
Press
(TALK)
To erase a stored number: press PROGRAM
Special Features
5-B Automatic Security Code Setting
Whenever you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help prevent
the unauthorized use of your telephone line by another cordless telephone
user.
5-C How to Use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press
a PBX or to access a long distance service.
Ex: Line access number
\
(9)
(PAUSE)
•Pressing
(PAUSE)
misdialling when you redial or dial a stored number.
•Pressing
(PAUSE)
between numbers.
5-D Handset Locator
You can locate the handset or page the handset.
1
Press (HANDSETÒLOCATOR) on the base unit.
•The IN USE/CHARGE indicator flashes and the handset beeps for 1
minute.
2
To stop paging, press (HANDSETÒLOCATOR) again or press (TALK)
twice on the handset.
,
\
(DIRECT)
(PAUSE)
(PBX)
(9)
\
Phone number
once creates a 3.5 second pause. This prevents
more than once increases the length of the pause
1
Press PROGRAM
•The TALK indicator flashes.
2
Enter a phone number up to
22 digits.
•If you misdial, press PROGRAM á,
and start again from step 1.
3
Press
(DIRECT)
•A beep sounds.
•If a pause is required for dialling,
press
(PAUSE)
Pressing
(PAUSE)
(5-C).
.
á
if a pause is required for dialling with
Section 4
.
á
.
where needed.
counts as one digit
\ AUTO
\
Ü
Section 5
.
(DIRECT)