Table of Contents
Advertisement
1
Getting Started
1-A Accessories
AC Adaptor................................one
Telephone line Cord..................one
For Australia
For New Zealand
Belt Clip.....................................one
Wall Mounting Adaptor..............one
For Australia only
Telephone Plug .........................one
1-C Settings
1
Connect as shown.
Hooks
Fasten the
cords to
prevent them
from
disconnecting.
1-B Location of Controls
Handset
TALK Indicator (2-A)
Headset Jack
(1-E)
(TALK) Button
(2-A)
(CH) (Channel)
Button (2-A)
Charge Contact
(6-A)
(RECALL) Button (5-A)
Hooks
Telephone Line Cord
To Single-Line Telephone Jack
Telephone Line Cord
To Power Outlet
(AC 230 V–240 V, 50 Hz)
AC Adaptor
Raise the
antennas.
Antenna
RECHARGE
Indicator (6-A)
(DIRECT) Button (4-A)
Navigator Key
(
LOUD/RINGER
AUTO
, PROGRAM
(2-A, 2-B, 3-A, 4-A, 5-A)
2
1
6
5
4
(REDIAL) Button (2-A)
Charge Contact
(6-A)
(PAUSE) Button
(5-C)
2
For Australia
To Socket
3
STOP
Telephone
Plug
For New Zealand
•USE ONLY WITH Panasonic AC ADAPTOR PQLV1AL.
•The AC adaptor must remain connected at all times. (It is
•To connect a standard telephone on the same line, see
•KX-TG2503ALF/KX-TG2503NZF is not designed to be used
Base unit
Back Side
Antenna
(1-C)
Cradle Lock Switch (6-F)
Charge Contacts (6-A)
,
,
)
IN USE/CHARGE
Indicator (1-C, 5-D)
Raise the antennas.
Charge the battery for
6 hours.
•See section 6-A for more
details.
•The IN USE/CHARGE
indicator lights.
normal for the adaptor to feel warm during use.)
section 6-D.
with rotary (pulse dialling) services.
Antenna
(1-C)
(HANDSETÒLOCATOR)
Button (5-D)
IN USE/CHARGE
Indicator
Advertisement
Table of Contents
