Table of Contents
Advertisement
Available languages
Available languages
TGA648FX(fx).book Page 4 Tuesday, June 9, 2009 3:35 PM
Battery installation/Battery charge
When the language selection is displayed after installing the batteries for the
first time, you can select your desired language.
{V}/{^}: Select your desired language. i M i {ic}
Important:
• Use the supplied rechargeable batteries. For replacement, we recommend
using the Panasonic rechargeable batteries noted in the base unit's operating
instructions.
• Wipe the battery ends (
,
S
T
• Avoid touching the battery ends (
• Confirm correct polarities (
S
• USE ONLY Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show "Please wait for 1 minute." when the
handset is placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
,
S
T
charge again.
Display language
9 display languages are available.
You can select "
", "
"
", "
If you select a language you cannot read: {ic} i K i {^} 3 times i
M i {V} 2 times i M 2 times i {V}/{^}: Select your desired language.
i M i {ic}
4
) with a dry cloth.
,
) or the unit contacts.
S
T
,
).
T
) and the charge contacts with a dry cloth and
","
", "
", "
", "
" or "
",
".
Advertisement
Table of Contents
