• Basic Controls..........17 • On-Screen Menu Displays ......19 • Specifi cations..........20 • Panasonic Professional Flat Panel Display Limited Warranty ...........21 • LIMITED WARRANTY STATEMENT ...22 • Customer Service .........23 For more detailed instructions, refer to the Operating Instructions on the CD-ROM.
Precautions for Installation • Do not install by yourself. Please ask a installation professional or your dealer to install. • This product complies with IP66 dust and water protection standard. Do not change or damage dust or water resistance of the product. •...
• When an abnormality or fault such as loose screw is detected, ask an installation professional or your dealer immediately for repair. • Panasonic will not be responsible for any damages from an accident such as defect of installation, improper use, modifi cation, or natural disaster.
15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected. This ENERGY STAR mark is applicable in USA only. ® As an ENERGY STAR Partner, Panasonic has determined that this product meets the ® ENERGY STAR guidelines for energy effi ciency.
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifi cations not expressly approved by Panasonic Corp. of North America could void the user's authority to operate this device.
If the plug contains a removable fuse cover, you must ensure that it is refi tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug.
Do not place any objects on top of the Display. • If any foreign objects get inside the Display, please consult your local Panasonic dealer. Transport only in upright position! •...
Page 8
If foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately. • A short circuit may occur, which could cause fi re. Contact your local Panasonic dealer for any repairs that need to be made.
Safety Precautions CAUTION When using the LCD Display Be sure to disconnect all cables before moving the Display. • If the Display is moved while some of the cables are still connected, the cables may become damaged, and fi re or electric shock could result.
Accessories Accessories Supply Check that you have the accessories and items shown Operating Instruction book CD-ROM Remote Control Batteries for the Remote (Operating Transmitter Control Transmitter instructions) N2QAYB000535 (R6 (UM3) Size × 2) Power supply cord Note: Remote Control Transmitter is not water protection type.
Accessories About Power Supply Cord Main plug types vary between countries. Check the shape of the power plugs to choose the appropriate cable for you. Country Name Appropriate AC Cables Cable A Asia India Plug Type : A Indonesia Cable B or Cable C Philippine Malaysia Singapore...
Connections AC cord connection Connect the AC cord Disconnect the AC cord Line up and push together connectors A and B Unscrew C and pull connector A and B apart. so they are tight and then twist C until A and B cannot be pulled apart.
Connections Video equipment connection EXT SP Speaker output terminal Black Black Remove the terminal While pressing Return the lever. cover the lever, insert the core wire. COMPONENT/RGB IN Component/RGB Video Input Terminal PC IN SERIAL PC Input Terminal Control the Display by connecting to PC DVI-D IN DVI-D Input Terminal...
Power On / Off Connecting the AC cord plug to the Display. (see page 12) Connecting the plug to the Wall Outlet Power switch Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type fi...
Page 15
Power On / Off When fi rst switching on the unit Following screen will be displayed when the unit is turned on for the fi rst time. Select the items with the remote control. Unit buttons are invalid. OSD Language English (UK) OSD Language Deutsch...
Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Display. Input signals will change as follows: HDMI1 HDMI2 VIDEO Component* PC: PC input terminal in PC IN. DVI: DVI input terminal in DVI-D IN.
Basic Controls Main Unit Power Indicator The Power Indicator will light. • Power-OFF ..Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ..Red •...
Basic Controls Remote Control Transmitter OFF TIMER button The Display can be preset to switch to stand-by after a fi xed period. The setting changes to 30 ACTION button minutes, 60 minutes, 90 minutes and 0 minutes Press to make selections. (off timer cancelled) each time the button is pressed.
On-Screen Menu Displays Remote Control Unit Display the menu screen. Press to select. Press several times. (Example: Picture menu) Each time the MENU button is pressed, the menu screen will switch. Normal Viewing Picture Sound Pos. /Size Setup Select the item. Select.
Specifi cations TH-42LFP30W TH-47LFP30W For USA, Canada For Europe and Asia For USA, Canada For Europe and Asia and Mexico and Mexico Power Source 110 - 127 V AC, 220 - 240 V AC, 110 - 127 V AC, 220 - 240 V AC,...
Three Panasonic Way 2F-5 Secaucus, NJ 07094 Panasonic Professional Flat Panel Display Limited Warranty Panasonic Solutions Company. (referred to as “the antenna, inadequate signal pickup, maladjustment of Warrantor”) will repair this product and all included consumer controls, improper operation, power line surge,...
Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED WARRANTY STATEMENT Panasonic Canada Inc. (also known as PCI) warrants this product to be free of WARRANTY COVERAGE PERIOD EXCEPTIONS defects in material and workmanship under normal use during the applicable...