RIDGID 1650RV0 Owner's Manual page 7

SP6940-1 1600RV0_1_SP6940-1 1/22/15 2:28 PM Page 7
Drum/Base Assembly (Continued)
4. Using a rubber mallet or hammer,
gently tap the wheel caps onto each
wheel center until the wheel caps are
firmly seated onto each wheel. This is
required on both sides.
5. Insert the caster stem into the socket
of the power base as shown. (Front
caster only).
6. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will be able to hear the
ball snap into the socket and the
caster will swivel easily when
positioning is correct.
Access Door
Access door located on the lid of the Vac
provides the user a way of discarding
larger items that may block or may not fit
through the hose very well, such as a
beverage can or block of wood.
Wheel Caps (2)
Caster Stem
Caster Ball
Socket
7
Wheels (2)
Access
Door
Lid