DOME CAMERA TK-C215VP4 INSTALLATION PRECAUTIONS TK-C215VP12 To installation contractor : Be sure to read the followings beforehand for proper installa- tion. Pass the manual to user after reading. To user : Please be sure to keep together with the instruction manual after reading.
Mounting screws for the base Safety Precautions Be sure to use M4 screw. Precautions regarding fall prevention Mounting the fall prevention wire Note: warning ● Pay attention to the length, strength, routing and material (insulation properties) of the fall prevention wire used. Mounting to a firm place.
Page 3
● Use GE silicon or its equivalents as the repair or maintenance, make sure to replace sealing material. the silica gel with a new one. ● Consult your nearby JVC’s dealer on the Note: replacement procedures. ● If the piping hole and the 2 mounting holes...
Page 4
Binding the sealing tape. Precautions for proper (When mounting the camera using the pipe) installation (continued) Bind at least 2 layers of the sealing tape to the joint of the pipe (point where the thread of the piping hole coincides with the screw hole of the Precautions regarding water-proof and pipe).