Receiving A Message - Panasonic KX-TG1810AL Operating Instructions Manual

TG1810_1822AL(e-e).book Page 43 Tuesday, March 1, 2005 6:46 PM
number of characters you can send or
receive may be limited by your SMS
service provider. Consult your SMS
service provider for details.
L If your message contains over 160
characters, "@@Long Message@@" is
displayed. Your service provider may treat
long messages differently from other
messages. Consult your service provider
for details.
L "Invalid Number" is displayed if you
try to send a message to a phone number
saved in the handset phonebook, caller
list, or redial list that is over 20 digits long.
L When sending a message, "Sending
Message" is displayed momentarily, then
"Transferring Message" is
displayed.
L If your phone is connected to a PBX, store
the PBX line access number (page 46).
Sending a saved message
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Public", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>},
then enter its password.
4
Select "Send List", then press {>}.
5
To read a saved message, press {e} or
{v} repeatedly to select the message,
then press {j/OK}.
L Messages are displayed in
chronological order and by destination
phone number.
6
To send the message, press {j/OK},
select "Send", then press {>}.
7
Press and hold {C/T} to erase all
numbers, then continue from step 6,
"Writing and sending a new message",
page 42.
SMS (Short Message Service)
Editing and sending a saved
message
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Public", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>},
then enter its password.
4
Select "Send List", then press {>}.
5
Press {e} or {v} repeatedly to select
the message, then press {j/OK}.
6
Press {j/OK}, select "Edit
Message", press {>}, then continue
from step 5, "Writing and sending a new
message", page 42.
Erasing saved messages
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Public", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>},
then enter its password.
4
Select "Send List", then press {>}.
5
Press {e} or {v} repeatedly to select
the message, then press {j/OK}.
6
Press {j/OK}, select "Erase", then
press {>}.
L To erase all messages in the selected
mailbox, select "Erase All", then
press {>}.
7
Select "Yes", then press {>}.
8
Press {ih}.

Receiving a message

When an SMS message is received:
43