Panasonic KX-TG1811NZ Operating Instructions Manual page 5

internal parts becoming accessible,
disconnect the power supply cord
immediately and return this unit to an
authorised service centre.
L Disconnect the telecom connection before
disconnecting the power connection prior
to relocating the equipment, and
reconnect the power first.
L No "111" or other calls can be made from
this device during a mains power failure.
This equipment shall not be set to make
automatic calls to the Telecom "111"
Emergency Service.
L To minimise the possibility of lightning
damage, when you know that a
thunderstorm is coming, we recommend
that you:
Unplug the telephone line cord from the
phone jack.
Unplug the AC adaptor from the AC
power outlet.
L The earpiece on the handset is
magnetised and may retain small metallic
objects.
L This equipment has been tested and
found to comply with AS/NZS 3548: 1995
limits for electromagnetic interference.
Any modifications to any part of the
system or to any peripherals may void the
EMC compliance of the system or the
peripherals.
L Not all telephones will respond to
incoming ringing when connected to the
extension socket.
L This equipment may not provide for the
effective hand-over of a call to another
device connected to the same line.
Important notice:
L Under power failure conditions, this
telephone may not operate. Please
ensure that a separate telephone, not
dependent on local power, is available for
emergency use.
Connections
Base unit
Hooks
Use only the included AC adaptor
and telephone line cord.
Charger (KX-TG1812 and KX-TG1813
only)
(220–240 V,
50 Hz)
Use only the included AC adaptor.
Note:
L Never install telephone wiring during a
lightning storm.
L Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
L The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using a BT double adaptor.
L The unit is not designed to be used with
Preparation
LIN E
To telephone
network
(220–240 V,
50 Hz)
Hooks
5