Guide To Base Unit Settings - Panasonic KX-TG1811NZ Operating Instructions Manual

Useful Telephone Settings
Handset settings
menu
OTHER OPT
RESET HS
*1 Call bar feature prohibits making outside calls. When call bar is turned on, only emergency
calls can be made. To store emergency numbers, see page 13.
*2 If you forget your PIN, consult your nearest Panasonic service centre.
*3 Direct call feature allows you to dial a preset phone number simply by pressing {C}. No
dialling is necessary.
*4 If you change the PIN, please write down your new PIN as the unit will not reveal the PIN
to you.
*5 Auto talk feature allows you to answer calls simply by lifting the handset off the base unit
or charger. You do not need to press {C}.

Guide to base unit settings

To customise the base unit:
1
{j/OK}
2
Press {e} or {v} to select "SETTING BS". i {>}
L "INPUT CODE" is displayed.
3
Enter the desired code number. Follow the instructions in the "Feature" column of the
chart.
L To exit the operation, press {ih}.
Code No.
{0}
{3}
{5}
12
Sub-menu
HSPIN CHANGE
AUTO TALK
—————
Feature (Default setting)
Reset base unit to its default settings.
Enter base unit PIN (default: "0000").
Recall time (600 ms)
Enter base unit PIN (default: "0000").
Select the desired setting by pressing {1} for 100 ms or {2} for 600
ms. i {>}
Change base unit PIN ("0000").
Enter the current 4-digit base unit PIN.
Enter the new 4-digit base unit PIN.
Enter the new 4-digit base unit PIN again.
Feature (default setting)
Change handset PIN ("0000").
Enter the current 4-digit handset PIN.
Enter the new 4-digit handset PIN.
Enter the new 4-digit handset PIN again.
Auto talk on/off ("OFF")
Reset handset to its default settings.
Follow steps 1, 2, and 3.
Enter handset PIN (default: "0000").
{v} i {>}
*1
*3
*4
*4
*5
*2
i {>}
*2
i {2} i {1}
*2
*2
*2