Table of Contents
Advertisement
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the AC
adaptor and turn off the handset, then reconnect the AC adaptor and turn on the handset.
Initial settings
Problem
w is flashing.
The handset display is blank.
The handset will not turn on.
Cause & solution
L The handset is not registered to the base unit.
Register it (page 32).
L The handset is too far from the base unit. Move
closer.
L The AC adaptor is not connected. Check the
connections.
L The handset is not turned on. Turn the power on
(page 10).
L Make sure that the batteries are installed correctly
(page 9).
L Fully charge the batteries (page 9).
L Clean the charge contact and charge again (page
9).
Useful Information
39
Hide quick links:
Advertisement
Table of Contents
