Making/Answering Calls; Making Calls - Panasonic kx-tg1805al Operating Instructions Manual

TG1805AL(e-e).book Page 14 Thursday, March 17, 2005 9:37 AM

Making/Answering Calls

Making calls

1
Lift the handset and dial the phone
number.
L To correct a digit, press {C/T}, then
enter the correct number.
2
Press {C}.
3
When finished talking, press {ih} or
place the handset on the base unit.
To adjust the receiver volume
Press {e} or {v} while talking. 4 volume
levels are available for the receiver.
Redial feature
Previously dialled phone numbers (each 24
digits max.) can be redialled.
To redial the last number dialled
Press {R}, then press {C}.
Note:
L You can also press {C} before pressing
{R}.
To make a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list.
1
Press {R}.
L The last number dialled will be
displayed.
2
Press {e} or {v} repeatedly to select
the desired number.
L To exit the list, press {ih}.
3
Press {C}.
To edit a number in the redial list before
calling it
1
Press {R}.
2
Press {e} or {v} repeatedly to select
the desired number, then press
{j/OK}.
14
3
Select "Edit and Call", then press
{>}.
4
Press {<} or {>} to move the cursor,
then edit the number.
L Place the cursor on the number you
wish to erase, then press {C/T}.
L Place the cursor to the right of where
you want to insert a number, then
press the appropriate dial key.
5
Press {C}.
To erase numbers in the redial list
1
Press {R}.
2
Press {e} or {v} repeatedly to select
the desired number, then press
{j/OK}.
3
Select "Erase", then press {>}.
L If you want to erase all numbers in the
list, select "Erase All", then press
{>}.
4
Select "Yes", then press {>}.
5
Press {ih}.
To store a number from the redial list into
the phonebook
1
Press {R}.
2
Press {e} or {v} repeatedly to select
the desired number, then press
{j/OK}.
3
Select "Add Phonebook", then press
{>}.
4
Enter a name (16 characters max.; see
page 35 for character entry), then press
{j/OK}.
5
Edit the phone number if necessary,
then press {j/OK}.
6
Select "Save", then press {>}.
7
Press {ih}.