Using The Hair Clipper; Blade Maintenance - Panasonic ER1511 Operating Instructions Manual

Using the hair clipper
Turn the dial clockwise or counterclockwise to adjust
the moving blade back and forth to get the desired
height. Adjustable in 5 stages from 0.8 mm to .0 mm
in 0.3 mm steps without attachments.

Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and sides
of the attachments.
2
2
Set the dial to "0.8" and then
mount the attachment to the
clipper as illustrated.
Removing the attachment from the clipper
Remove the attachment as illustrated.
Blade maintenance
Removing and mounting the blade

Removing the blade
1. Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
• Be sure to turn off the power
before you remove the blade.
0.8

Mounting the blade
1. Set the dial to "2.0".
2. Fit the mounting hook
into the blade mounting
on the clipper and push
in until it clicks.
2.0
5