Panasonic SC-HC40 Operating Instructions Manual page 5

Attaching the unit to a wall (Optional)
Wall mount instructions
• Before installation, turn the unit off and disconnect the AC mains lead plug from the AC receptacle.
• Tighten screws firmly to prevent slack in each step.
1. Detach the stand from the unit.
 Unscrew the fixing screw
A
Keep the removed screws in a safe place.
Bottom of main unit
2. Attach the wall bracket to the back of the unit.
 Align both tabs on the wall bracket and the main unit, then
slide it in until it clicks into place.
Wall bracket (bottom view)
Tab
Rear of main unit
3. Drive the mounting screws into the wall.
 Measure and mark the position of the mounting screw
• Use figures below for screw positions and measurements.
• Please install using both wall mounting screws.
• Use a level ruler to ensure both screws are level.
• Use a screw which is strong enough to support the weight of at least 20 kg.
Rear View
300 mm
Space required
130 mm
74.8 mm
77.5 mm
(2 pieces) at the bottom of the unit.
Soft blanket or cloth
Fixing screw
2
1
(2 pieces) and drive them into the wall.
C
AUX
85.5 mm
500 mm
700 mm
(continued)
 Slide the stand off the unit.
Stand
A
 Secure the wall bracket with fixing screw
(Tightening torque: 1.2 Nm to 1.5 Nm)
Wall
163 mm
4 mm
Mounting screw
C
Space required
(2 pieces).
B
Fixing screw
B
A length which supports the
strength of 20 kg or more must
be kept for each screw.
8 mm to 9.5 mm
2.2 mm to 2.8 mm
2.5 mm to 3.5 mm
5
5