Table of Contents
Advertisement
Using
Using the trimmer
►
Trimming your beard and moustache
1. Slide the power switch on the main body to the
"0·CHARGE" position to turn off the trimmer.
2. Make sure there is no damage to the blade.
3. Apply a few drops of the oil to the blades. (See
page 6.)
4. With the dial in the "1" position, mount the attachment.
5. Turn the dial to move the comb attachment to the
desired trimming length (between 2 mm and 18 mm).
Indicator Trimming length Indicator Trimming length
1
2
3
5
6
•
Actual hair length will be a little longer than the height you set.
6. Slide the power switch on the main body upwards to turn on the
trimmer.
7. Place the angled face of the comb against the
skin and cut the beard by moving the trimmer in
all directions to obtain a uniform cut.
•
With curly facial hair, the comb attachment may not
cut all of the hair. In this case, remove the comb
attachment and use a conventional comb to draw out
the remaining uncut hair.
►
Shaping your moustache
1. Remove the comb attachment.
2. Place the angled edge against the skin and make
the border of the beard even.
2.0 mm
3.0 mm
.5 mm
6.0 mm
7.5 mm
9.0 mm
7
10.5 mm
8
12.0 mm
9
13.5 mm
10
15.0 mm
11
16.5 mm
12
18.0 mm
5
Advertisement
Table of Contents
