Panasonic DVD-LX95 Operating Instructions Manual page 34

Troubleshooting guide
Sound incorrect
Sound distorted.
Piercing noise comes
from the speakers.
Effects do not work.
No sound from the unit's
speaker.
No sound from other
speakers.
No sound when you
change the play speed.
Recording
Cannot record to digital
recording equipment.
(Incorrect sound
recorded.)
Displays
"/"
No On-Screen display.
"Check the disc."
" ERROR 01"
" ERROR 02"
" ERROR 03"
∑∑
"H "
∑∑
stands for a
number.
"Cannot display group
xx, content xx"
34
RQT8078
≥ Select "Off" in "Advanced Surround". (12)
≥ Move unit away from mobile phones.
≥ Noise may occur when playing WMA files.
≥The disc may have restrictions on the method of audio output. With
some multi-channel discs, unless the number of connected speakers is
the same as the disc's channel specification, audio will not be output
properly. Refer to the disc's jacket for more information. [DVD-A]
≥There may be some noise output when playing MPEG4, but this is
normal.
≥ If you have connected a digital amplifier which does not include
decoder, be sure to select "PCM" in "Dolby Digital", "DTS Digital
Surround" or "MPEG ([Except\Asia])" in "Audio" tab. (27)
≥ None of the audio effects work when the unit is connected through
the digital optical cable and is outputting bitstream signals. (28)
≥ Some audio effects do not work or have less effect with some discs.
≥ Advanced Surround and Multi Re-master do not work if you have
changed the play speed.
≥ The speaker is off if the LCD is closed or headphones are connected.
≥ Turn up the volume. (10, 20)
≥ Check all connections and settings. (28)
≥ There may be a pause in sound.
≥ You cannot record WMA/MP3.
≥ You cannot record DVDs that have protection preventing digital
recording.
≥ You cannot record DVDs if the recording equipment cannot handle
signals with a sampling frequency of 48 kHz.
≥ Make the following settings:
– Advanced Surround:
– PCM Digital Output:
– Dolby Digital/DTS Digital Surround/MPEG ([Except\Asia]): PCM (27)
≥ The operation is prohibited by the unit or disc.
≥ Select "On" for "On-Screen Messages" in "Display" tab. (27)
≥ Clean the disc. (35)
≥ A problem has occurred with the battery pack. Consult your dealer.
≥ The battery pack has been recharging for 12 hours but has failed to
recharge for some reason. Recharge again.
≥ You are recharging in a location that is too hot or too cold. Recharge
at normal temperature (
≥ Trouble has occurred. The number appearing after "H" depends on
the problem. Turn the unit off and on again. Alternatively, turn the unit
off, disconnect the power source (AC or battery pack), reconnect the
power and turn the unit on again.
≥ If the service numbers fail to clear, note the service numbers and
consult your dealer.
≥ You are trying to play incompatible groups or content. (9, 19)
i o i o
5 C to 35 C).
Off (12)
Up to 48 kHz (27)