Table of Contents
Advertisement
8 Initial Settings
8.3 WEB Settings
If you log in using the administrator user account, when "3. Initial settings: 3. WEB settings"
is selected from the menu, the screen shown below is displayed.
The Web-related settings, such as site name, e-mail settings, and network settings, can be made.
Click on a box for an item you wish to set and directly enter values.
[WEB settings]
Enter a site name (within 40 characters). An "=" (equal sign) cannot be used.
An automatic updating interval of a screen that will be displayed on the Web browser can be set.
You can select from among Invalid, 10 seconds, 20 seconds, 30 seconds, 1 minute, 2
minutes, 10 minutes, 30 minutes, and 1 hour.
If "Invalid" is selected, the data on a screen will not be updated until you click on the
"New" button.
* The following screens will be automatically updated:
Each tenant (
Each tenant details (
All units (
[Network setting]
When a DHCP instead of a static IP is used, select the "DHCP Enabled" radio button.
If "DHCP Enabled" is selected, items
The factory default is "DHCP invalid" .
Enter the IP address for the Web Interface. Refer to the settings of other devices, such as
the PC and router. The factory default is "192.168.1.1" .
Enter the subnet mask for the Web Interface. Refer to the settings of other devices, such
as the PC and router.
Enter the IP address of the default gateway that is connected with the Web Interface, as required.
)
)
)
–
will be disabled.
28
3 3
Main
Sub
Advertisement
Table of Contents
