Wireless Lan Connection - Panasonic DMP-MS10 Operating Instructions Manual

CAUTION
Unit
≥ This unit may receive radio interference caused by mobile telephones during use. If
such interference occurs, please increase separation between this unit and the
mobile telephone.
Placement
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to direct sunlight, high temperatures, high humidity, and
excessive vibration.
Batteries
Mishandling of batteries can cause electrolyte leakage and may cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities or dealer and
ask for the correct method of disposal.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of
time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for a long period of
time. Store in a cool, dark place.
AC adaptor
≥ The AC adaptor operates on AC between 100 V and 240 V.
But obtain a suitable plug adaptor if the plug does not fit the AC mains socket.
≥ The unit is in the standby condition when the AC adaptor is connected. The primary
circuit is always "live" as long as the AC adaptor is connected to an electrical outlet.

Wireless LAN Connection

The following limits are in place regarding the usage of this unit. You must be aware of
these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage which may arise
due to a failure to obey these limits, or to any condition of use or disuse of this unit.
≥ Data transmitted and received over radio waves may be intercepted and
monitored.
≥ This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and follow the following points:
– Do not expose this unit to high temperatures or direct sunlight.
– Do not bend, or subject this unit to strong impacts.
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any way.
4
VQT4X70