D-Link DIR-816 User Manual page 52

Section 3 - Configuration
The Virtual server page allows you to open a single port. If you would like to open a range of ports, refer to the next page.
Usual Service Select an application from the drop-down menu or
Name: type a name in the next field.
User-defined Enter a service name.
Service Name:
Protocol: Select TCP or UDP from the Protocol drop-down menu.
WAN Port: Enter the WAN port number.
LAN Open Port: Enter the LAN Open port number.
LAN IP Enter the IP address of the computer on your local
Address: network that you want to allow the incoming service to.
Click the Apply button to save any changes made. The virtual server will then be added to the current virtual server forwarding table below. To
delete or disable a virtual server, click the Delete or Disable buttons in the action field of the virtual server in the table.
D-Link DIR-816 User Manual 48