D-Link DIR-816 User Manual page 36

Section 3 - Configuration
If you select WEP as the encryption option, the following
settings below will appear:
Authentication
Select the authentication type.
Type:
Encryption
Select the encryption strength.
Strength:
Security
Encryption
Select up to four WEP keys.
(WEP) Key:
If you have selected any WPA option, the following setting
will appear.
Pre-shared Key:
Enter a pre-shared key.
Click the Next button to save any changes made.
IP Address:
Enter an IP address for the wireless repeater.
Subnet Mask:
Enter a subnet mask for the wireless repeater.
Click the Finish button to save the configuration.
Note: It is recommended that you modify the IP address of the
wireless repeater to avoid IP address conflicts with the router.
D-Link DIR-816 User Manual 32