BMW R1200RT Rider's Manual page 81

is disconnected from the motor-
cycle's battery.
An alarm lasts for approximately
26 seconds. While an alarm is in
progress an alarm tone sounds
and the turn indicators flash. The
type of alarm tone can be set by
an authorised BMW Motorrad
dealer.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The anti-theft alarm telltale light
then signals the reason for the
alarm for one minute.
The meanings of the flash codes
are as follows:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorised key
Flashes 4x: Disconnection of
the DWA anti-theft alarm from
the motorcycle's battery
Flashes 5x: Motion sensor 3
DWA Adapting
with anti-theft alarm (DWA)
Settings
Call up the
Vehicle
menu and select
Alarm syst.
.
The following settings are avail-
able:
Automatic On
-
theft alarm is activated auto-
matically when the ignition is
switched off.
Automatic
theft alarm has to be activated
with the remote control when
the ignition is switched off.
OE
Alarm tone
tone.
Operat. tone
-
Turn indicators flash and one
tone sounds as confirmation
when the alarm is switched on
or off.
Operat. tone
Turn indicators flash as only
confirmation when anti-theft
alarm is switched on or off.
Configure the desired settings
using the Multi-Controller.
: Anti-
4
Off
- : Anti-
79
: Type of alarm
On
- :
z
Off
- :