Jump-Starting - BMW R1200RT Rider's Manual

Seat speaker unit 2 in the
mount.
Install screws 1.
Hold speaker cover 1 in posi-
tion and install screws 2.
Replacing LED rear light
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replacing LED turn
indicators
LED turn indicators can be
replaced only as a complete
unit. Consult a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
Replacing waveguide
rings
with daytime running light
with Pro headlight OE
Waveguide rings are integrated
into the headlight and can be
replaced only together with the
headlight. Consult a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Replacing LED auxiliary
headlights
with LED auxiliary headlights
The LED auxiliary headlights can
only be replaced as a unit; it is
not possible to replace individual
LEDs.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.

Jump-starting

The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
OE
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the on-board socket
to jump-start the engine of the
motorcycle.
7
OA
133
z