Wiring Connection; Custom Wiring Harness; Remote Control (Rm-Rk52) - JVC KW-R920BT Instruction Manual

Wiring connection

IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to professionals
for your safety. Consult your car audio dealer.
Vehicle dashboard
Factory wiring
harness (vehicle)

Custom wiring harness

(separately purchased)
* 1
Firmly connect the ground
wire of the amplifier to
the car's chassis to avoid
damaging the unit.
* 2
You can also connect a
subwoofer speaker directly
using this lead without an
external subwoofer amplifier.
For setting, 18.
Recommended connection
Rear/ Front/ Subwoofer output
For 3-way crossover: Tweeter/
Mid Range/ Woofer output
To the steering wheel
remote control adapter
Join the same color wires together.
Blue: To power antenna
Blue/white: Remote (200 mA max.)
Blue/white: To amplifier
Orange/white: Illumination
Brown
(Not used)
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Gray/black
White: Front speaker/For 3-way crossover: Mid range speaker (left)
White/black
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
Green: Rear speaker *
Green/black *
Antenna terminal
Light blue/yellow
STEERING
WHEEL
REMOTE
2
/For 3-way crossover: Tweeter (left)
2
Signal cord (not supplied)
Fuse (10 A)
Microphone input jack
( 10)
Ignition switch
Car fuse block
Separate red wire
Make this connection if your vehicle
factory wiring harness does not have
"12 V ignition switch" wire.
1
JVC Amplifier *
Remote wire
(not supplied)
29
ENGLISH